HYLOMAR AEROGRADE ULTRA PL32A
NON-CHLORINATED SOLVENT VERSION OF AEROGRADE CARRYING ROLLS-ROYCE APPROVAL
Hylomar Aerograde Ultra is a non-Setting and non-hardening gasketing compound made with non-chlorinated solvent for use in the aeronautical industry with a wide operating temperature of -50°C to +250°C. This product carries the same Rolls Royce MSRR 9055 approval as the
Aerograde product and OMAT numbers 4/47A (standard version).
FEATURES
- Made with non-chlorinated Solvent
- Non-hardening and non-setting
- Resistant to air, water and oils
- Specified worldwide by OEM’s
- Wide operating temperatures (- 50°C to +250°C)
- Easy to use
- Unlimited assembly time
- Easy to disassemble components
- For use on metal and plastic close fitting components
- Use as a non-curing thread sealant
- Resists vibration
- Easy to apply to vertical and underside joints due to its thixotropic properties
- Can be used with or without a gasket
PRODUCT SIZES
Pack Size – 75ml tube
Hylomar Aerograde Ultra is resistant to:
- Air, water and oils
- Turbine and piston engine combustion products
- Water/glycol and methanol/water mixtures
- Petroleum and synthetic diester lubricating oils
TYPICAL PHYSICAL PROPERTIES
| Hylomar Areograde Ultra | |
| Film Thickness | 0.03 mm |
| Surface Finish Max | 3.0 μm Ra |
| Area coverd by 80 mils | 1.36m² |
| Product coverage after drying | 4mg/cm² |
HYLOMAR AEROGRADE ULTRA PL32A supplier in Abu Dhabi UAE
Hylomar Products Supplier in Abu Dhabi
Reviews
There are no reviews yet.