Rig Store

Rig Store Logo
Rigstore Site Logo
Rig Store Logo
, ,

Kelly Cock

Kelly Cock

  1. Brief introduction

    Kelly cock is one type of manual control valve which for drill string circulating system, could prevent blow out efficiently. It is divided by upper Kelly cock and lower Kelly cock. Upper Kelly cock is used below tap and above Kelly, lower Kelly cock is used below Kelly and above drill pipe or between above of Kelly protecting sub. Rotating 90 degree by professional wrench to open/close. In drilling operation, connect Kelly cock above and below Kelly could avoid blow-out accident.

  2. Structure feature

    Kelly cock sealing is by rigid coordination through ball valve body and ball seat, rubber seal is as assistant. Surface is compressed by spring. When in blow-out and close Kelly cock, pressure in well will force valve key to valve seat. Kelly valve sealing is better as higher of pressure to valve seat.

  3. Technical specification

    Upper Kelly cock:

    OD (mm) Hole ID (mm) Working pressure (MPa) Thread connection Suitable scope
    Ф146 Ф50 35/70/105 4 1/2’’REG-LH Square Kelly or hexagonal kelly
    Ф200 Ф60 35/70/105 6 5/8’’REG-LH

    Lower Kelly cock:

    OD (mm) Hole ID (mm) Working pressure (MPa) Thread connection Suitable scope
    Ф105 Ф41 35/70/105 DC31 Square Kelly or hexagonal kelly
    Ф121 Ф50 DC38
    Ф127 Ф50 DC38
    Ф165 Ф61 DC46
    Ф178 Ф71 DC50, 5 1/2’’FH

Reviews

There are no reviews yet.

Be the first to review “Kelly Cock”

Your email address will not be published. Required fields are marked *