| Application method | Dispense System |
| Applications | Bonding Dissimilar Materials, Bonding Plastic, Bonding Rubber, Construction, Direct Bonding, Edge Bonding, Interior Repairs, Structural Bonding |
| Cure type | Room Temperature (Ambient) Cure, Two Component Mix |
| FEA (finite element analysis) | Finite Strain, Viscoelastic |
| Fixture time, Aluminium (etched) 0.5mm gap | <60.0 sec. |
| Gap fill | 5.0 mm |
| Mix ratio, by volume | 10 : 1 |
| Number of components | 2 Part |
| Physical form | Gel |
| Recommended for use with | Composite, Composite: Advanced Composites, Dry Surface, Elastomer: Highly Filled Elastomer, Epoxy, Fiberboard, Gel Coat, Laminate, Metal, Non-Gel Coat, Painted Surface, Phenolic, Plastic, Rubber, Thermoplastic, Thermoset, Urethane: Cast Urethane, Vinyl, Wood |
| Shear strength, Steel (grit blasted) | 25.0 N/mm² (3625.0 psi ) |
| Mixed | |
| Key characteristics, Mixed | Cure Speed: Ultra Fast Cure, Gap Filling, Moisture Resistant, Multipurpose |
| Operating temperature, Mixed | -40.0 – 100.0 °C (-40.0 – 212.0 °F ) |
| Resin | |
| Casson viscosity, cone & plate, Resin @ 25.0 °C | 200.0 – 1300.0 mPa·s (cP) |
| Colour, Resin | Yellow |
| Hardener | |
| Colour, Hardener | Clear |
| Viscosity, cone & plate, Hardener @ 25.0 °C Shear Rate 1,000 s⁻¹ | 1.0 – 30.0 mPa·s (cP) |
Reviews
There are no reviews yet.